 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||
 |
 |
 |
|
||||||||||
 |
|
||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||
 |
 |
 |
 |
 |
|
||||||||
 |
|---|
Important Information
|
Primer |
| MG04 (msds A B / tds) - 100% solids, two component, structural epoxy used as a primer to bond polyurea to concrete. The low viscosity, moisture insensitive epoxy can be scrubbed onto sound concrete prior to the placement of polyurea coatings. This chemical and wear resistant binder can be used as a resurfacer or patching compound for the repair of floors. MG04 can also be utilized as a clear, high-build, non-gloss coating. Aggregate may be added to produce a mortar, which provides excellent wear resistance as a floor topping, or patching mortar for spalled concrete. Features: Meets criteria for ASTM C-881, Type I, II, IV & V, Grade 1, Class B & C May be used as a binder or coating Easily mixed No shrinkage Excellent chemical and wear resistance Provides good waterproof properties V.O.C. compliant |
| Pure Urea Systems |
| MGP25 (msds A B / tds) - 100% solids, state-of-the-art, VOC-free, two-component pure polyurea elastomeric coating. This seamless system exhibits extraordinary performance characteristics. MGP25 is based on amine-terminated polyether resins, amine chain extenders and MDI prepolymers. This coating achieves an extremely tough, flexible, chemical and abuse resistant finish for a wide range of applications. Advantages: Smoother finish, higher elongation; greater flexibility, almost instant gel time, fast cure; can be handled/walked on in one minute, can be built up to any thickness in one application, seamless, application at -20°F to 300°F, resistant to thermal shock, no VOC’s, USDA approved, resistant to many chemicals. Uses: Containment areas, earthen containment, pipe coating, floor and wall systems, cold storage areas, waste water, tank linings, cooling tower liners, pump and paper mills, industrial plants, mechanical rooms, aquariums, fertilizer plants, petrochemical plants. |
| MGP45 (msds A B / tds) - 100% solids, state-of-the-art, VOC-free, two-component, pure polyurea elastomeric coating. MGP45 is based on amine-terminated polyether resins, amine chain extenders and MDI prepolymers. This coating achieves an extremely tough, flexible, chemical and abuse resistant finish for a wide range of applications. Advantages: Smoother finish, higher elongation; greater flexibility, slower reactivity thus wetting into the substrate more advantageously, fast cure; can be handled/walked on in one minute; back in service in one hour, can be built up to any thickness in one application, seamless, application at -20°F to 300°F, resistant to thermal shock, no VOC's, USDA approved, resistant to many chemicals, may be topcoated for additional chemical resistance. Uses: Concrete, steel, fiberglass, railcars, corrosion protection, containment areas, cold storage areas. |
| MGP80 (msds A B / tds) - a sprayable, VOC free, two component, pure polyurea elastomeric coating. Its low viscosity at operational temperatures makes this product ideal for both in-plant and field applications. Unique properties of this coating are its rapid cure time and its insensitivity to moisture. Advantages: Almost instant gel time, fast cure; can be handled/walked on in one minute, can be built up to any thickness in one application, seamless and flexible, applications -20°F to 300°F, resistant to thermal shock, no VOC's, USDA approved, resistant to many chemicals. Uses: Containment areas, earthen containment, pipe coating, floor and wall systems, cold storage areas, waste water, tank linings, cooling tower basins, pump and paper mills, industrial plants, mechanical rooms, aquariums, fertilizer plants, bridges, manhole vaults, wet wells, dry wells, street lights, lift station waterproofing, zoo enclosures, dairy barn walls and floors, floating docks. |
| Hybrid Systems |
| MGP42 (msds A B / tds) - class A, sprayable, VOC free, two component, aromatic, elastomeric coating. Its low viscosity at operational temperatures makes this product ideal for both in-plant and field spray applications. Unique properties of this coating include a slow gel time, insensitivity to moisture and sprayability over many substrates; including both polyurethane and polystyrene foam and steel piping. |
| MGP43 (msds A B / tds) - a sprayable, VOC free, two component, aromatic, elastomeric coating. Its low viscosity at operational temperatures makes this product ideal for both in-plant and field spray applications. Unique properties of this coating include a slow gel time and insensitivity to moisture. |
| MGP44 (msds A B / tds) - a sprayable, VOC free, two component, aromatic, elastomeric coating. Its low viscosity at operational temperatures makes this product ideal for both in-plant and field spray applications. Unique properties of this coating include a slow gel time, insensitivity to moisture and sprayability over both polyurethane and polystyrene foam. |
| MGP77 (msds A B / tds) - a sprayable, VOC free, two component, aromatic, elastomeric coating. Its low viscosity at operational temperatures makes this product ideal for both in-plant and field spray applications. Unique properties of this coating are its rapid cure time and its insensitivity to moisture. |
| Aliphatic System |
| MGP78 (msds A B / tds) - 100% solids, two-component, elastomeric membrane. This coating achieves an extremely tough, flexible, chemical and abuse resistant finish for a wide range of applications. As MGP78 is an aliphatic polyurea, it will also resist UV attacks – making it a colorfast topcoat. |
| Joint Filler |
| MGP168 (msds A B / tds) - a two-part hybrid polyurea, elastomeric joint filler. It is used to fill and protect joints in industrial concrete floors subjected to heavy hard-wheeled vehicles. It is also ideal for spalled joint repair, random joint filling and patching, etc. |
